close #1082

* Change the ordering of the includes so that Function.prototype.bind is declared before gettext.

close #1022

* Pull out core state machine code from the original state_machine.js.
* Update code and tests for use in new state machine.
* Add new state_machine core.
* Add history.
* Add command.
* Update tests.
* Rename resources/state_machine to resources/state

This should simplify a lot of these "cancel email verification" problems.

* Change the ordering of the includes so that Function.prototype.bind is declared before gettext.

close #1022

* Pull out core state machine code from the original state_machine.js.
* Update code and tests for use in new state machine.
* Add new state_machine core.
* Add history.
* Add command.
* Update tests.
* Rename resources/state_machine to resources/state

This should simplify a lot of these "cancel email verification" problems.

* Put all tests under the cases directory.
* Remove the extraneous _unit_test on the end of every file name.
* Put qunit related code into qunit.
* Put mocks and testHelpers into top level test directory.

Adding the shell of a cookie check.  Cleaning up network.js, changing network.js's callbacks to be simpler.

* Adding complete to helpers.js, which required a reordering of scripts.
* Using complete in network.js so that existence of callbacks is checked automatically.
* Add a cookie_check.js module which checks which shows an error message if the user's cookies are disabled.
* Get rid of yesterday's code which triggered an event if cookies were disabled.

issue #835.

* Makes for easier debugging and testing.

* Update network to allow for undefined code_version
* Update unit tests.
* Move code_check to static/shared/modules/
* Update build script for new location.

issue #226

* Add new delay screen.
* Add new tests to check for delay screen.
* Simplify display logic of the error message.

close #915

Adding i18n to wsapi. Split strings into client.po and messages.po.

Switched email from mustache to EJS templates.

Created fake locale db-LB for development and debugging.

Updated scripts.
See http://viewvc.svn.mozilla.org/vc?view=revision&revision=99911

* Remove the set_password controller, which was never used.
* Remove the set_password test suite.
* Remove the set_password HTML with the autofocus element, which caused some versions of WebKit to wig out.
* In storage.js, make sure when we do JSON.parse, there is something to parse.

close #851
close #889

* Simplify the signature for checkAuthenticationAndSync by removing onSuccess.
* Simplify the user unit tests by using failureCheck.
* Add testHelpers.failureCheck which came from network.js
* Cleanup the user unit tests a ton.

* Added tests for the various flows in required_email.
* cache off address information, clean up required_email controller a bit.
* Add some error messages.
* User.addressInfo now returns whether the primary users are authenticated with their IdP.

* Add function.prototype.curry
* Make sure all callbacks are called through the "safe" complete function.

close #732

Fixing up a bunch of async problems that were causing the unit tests to error out.  Only call complete whenever jQuery animations are complete.

Upgrading jQuery to 1.7.1.  Fixes a crash bug in IE8 where loading browserid.org would cause IE to restart.

close #806

* All unit tests pass again.
* Renaming primary_user_verified to primary_user_ready
* Adding a random_seed to the context info to fix the unit tests and the adding of the seed.
* Renamed all ejs templates to match their URL.
* Each page unit test writes the ejs template that it needs to the DOM.

* Not actually hooked up in the dialog yet.
* Need backend support.

* Added a new controller, primary_user_provisioned.
* Slimmed down user.provisionPrimaryUser so that it does not authenticate users.
* Using ADD_EMAIL and CREATE_EMAIL as the hash when redirecting back from an IdP as bits of state.

* A lot of cleanup and test adding for handling primary users.
* Trying to genericize a lot of the message names and leave the state machine decide on state.
* Simplifying the ActionsMock in state_machine_unit_test.
* Loads of file renames to make easier to read.

* Hacktastic and minimal tests - loads of tests needed.
* Assume if the #EMAIL=<email> hash is specified on the URL, then try provisioning the user.
* Fixed all previously broken, non-completing tests.
* Added several new controllers - email_chosen, provision_primary_user, verify_primary_user.

* Use WinChan to open a new window to the primary.
* Add the idp_auth_complete page for the IdP to redirect back to.
* When the window closes, re-try to authenticate the user with the primary.
* Add a helper to show an error message.
* Add a WinChan mock.
* Update unit tests to handle the "need to authenticate with IdP" scenario.
* Update compression scripts for WinChan to be included on the main site.

* Match the text on the verify_user page.
* Add a new PageHelper function, replaceFormWithNotice.
* Replacing the specialized code in verify_email_address.js with above function.

* Adding a window Mock.
* Adding a new template for the "you've gotta verify" screen.
* Hooking up the logic to redirect - which closes the window.

* Add network.authenticateWithAssertion and related tests.
* On signup page, start the redirection code to verify with primary in new tab.
* in network.js, rename all the onSuccess to onComplete for clarity.
* Simplify tests for primary user provisioning while "not authenticated".
* Generate fake keys/certs in the provisioning mock.
* Save off the keypair/cert given to us by the provisioning frame before getting an assertion.
* Generate an assertion and log the user in on primary provisioning success.

* Adding unit tests for network.addressInfo
* to the XHR mock, adding info needed to test primary/secondary flow.
* Adding a BrowserID.Mock.Provisioning to handle mocking out provisioning capabilities.
* Creating a new User.createUser that handles creating users on either primaryies or secondaries.
* Adding unit tests for the signup page for primary, updating old tests for secondary.
* Starting a shell of error messages and success markup on signup page.
* Starting to hook up the dialog, adding loads of tests.  Secondary based user creation good again.

stub in a new javascript library that will abstract dialog code from the details of embedding and interacting with a primary's provisioning content.

* Add markup/CSS, including tooltips.
* Add logic to manage_account.js.
* Add changePassword to network/user.js.  Add related tests.
* Update xhr mock so that session_context always returns "valid" info unless contextAjaxError is specified.
* Update the tooltip so that it has a reset function.

close #771
close #114

stub in a new javascript library that will abstract dialog code from the details of embedding and interacting with a primary's provisioning content.

* Adding getCodeVersion to network.
* Adding error messages for if session_context fails during getCodeVersion.
* Adding a code check module.
* Updating start so that most modules are only registered whenever code is up to date.
* If the scripts are out of date, append a new script to the head.
* Cleaning up the dialog module's interface with the channel.
* Updating the compression script.
* Splitting off the actions into its own page module/controller for easier testing.

issue #226
issue #687